Master Food Preserver Class – Week 7

Week 7 of the Master Food Preserver class was a big old meat fest. We made jerky, smoked fish, pickled fish, and cooked up some summer sausage. This post will be the last in the Master Food Preserver series (I know, so sad), as week 8 was just our presentations and planning for the epic events of this summer. But don’t worry, there is still much more knowledge in that massive notebook of mine that I will continue to share with you all.

The first thing we did in class was make beef jerky. Beef jerky can be made safely at home, but there are just a couple of precautions that you need to take to ensure it is safe. The PNW 632  publication (click it for the link) is full of excellent information for making jerky, but I’ll give you the summary version here.

IMG_3664 copy

Bacterial contamination is a concern when making jerky, which is why it needs to be sufficiently heated to ensure any pathogens are destroyed. Three methods can be used to do this: post-drying heating, precooking the meat, and a vinegar soak. The post drying heating is perhaps the easiest, all you do is cook the jerky in the oven at 275F for 10 minutes after it is done. This is the method I tend to use. Preheating is done either by cooking the jerky strips in hot brine for about 1.5-2 minutes, which obviously doesn’t really work for ground meat jerky, or by cooking in the oven at 325F until an internal temperature of 160F (165F for poultry) is reached. You need a nice thin tipped thermometer for this. Lastly, soaking the meat in vinegar has been shown to be effective as well, but of course gives the jerky a very vinegary flavour. It’s also not been tested for game meats. And that’s basically all there is to it for safety. Jerky can be dried at the highest setting in a dehydrator (145-155F) or in an oven. But for the oven you really need to test if it can maintain those temperatures first.

Other notes about jerky:
– Yes, you can use other meats like poultry, fish and game meats.
– Just recently the recommendations have changed and it is okay to use ground meat, so long as you post dry heat it. Get the leanest meat possible, 93% lean or greater. The concern with ground meat is that the bacteria that could have been on the surface is distributed throughout by grinding, so use extra caution when making ground meat jerky.
A jerky gun can be useful for shaping ground meat into strips.
– To easily cut jerky from steaks, partially freeze it so you can cut even strips; aim for about  1/8-1/4 inch thick.
– To test for doneness, cool the jerky slightly and try bending it. If it bends and cracks it is done. You don’t want it to snap right in half or it’s over done but if it is bendy but still doesn’t really break it’s not done. Ya, it sounds a bit wishy washy, but you get the feel for it pretty quickly.
– When the jerky is done, condition it in a jar or other container, loosely packed. Conditioning basically just means they sit there for a couple says and equalize in moisture content. Shake it occasionally. If you see moisture collect in your container, they are not dry enough.
– Store jerky in a cool dark place. I like to just store it in a quart jar. It will keep for 2 weeks at room temperature, 3-6 months in the refrigerator, and up to a year in the freezer.
– Nom nom nom

IMG_3570 copy

The next thing we did for meat week was to learn about smoking fish. As with jerky, this can be done safely at home, but there are precautions you should follow to ensure a safe product. Additionally, products need to be refrigerated or frozen when made at home as a precaution, even though you can find commercial products that are safely stored at room temperature. This is due to us not being 100% certain of the salt and moisture content when making it at home. Canning your smoked fish is also an option.

If you want more information beyond what I provide here, the publication for this one is PNW 238 (again click for the link).

In summary:
– Smoked fish must reach an internal temperature of 150F (preferably 160F) and hold at that temperature for 30 minutes. This is important to kill bacteria such as Clostridium botulinum.
– Fish must be salted or brined, and since at home it is difficult to measure salt content, this is why as an added precaution the product must be refrigerated.
– Salt fish in a solution of 1 part table salt to 7 parts water, by volume. Brine for about an hour, although fatty or larger pieces of fish need 2 hours. Less fat = less brine time. Experiment with your fish – it should taste salty, but not unpleasantly so.
– After brining, fish is air dried until a pellicle (shiny, tacky skin) forms. This is usually at least 1 hour. After it forms it is ready to be smoked.
– Fish should be smoked then cooked. Smoke at 90F for up to 2 hours, then increase the temperature until the internal temperature of 150F is reached and maintained. This means the smoker temperature needs to be around 220-225F. If this cannot be achieved in your smoker, heat the fish in the oven after it’s smoked.
– Use hardwood for smoking, soft woods make unpleasant fish.
– If canning your smoked fish, just smoke the fish lightly, for up to 2 hours, then can immediately. Pints will need to be canned for 110 minutes. For full instructions follow the PNW 450 publication.
– Don’t store longer than 2 weeks in the fridge, freeze or can if you want to store it longer.

IMG_3572 copy

I wish this were full and I got to take it alllllllll home with me.

IMG_3573 copy

Mmmm smoked salmon. Makes me want to take a fishing trip to Alaska so badly!

IMG_3582 copy

Honestly, I didn’t even taste the pickled fish because it seemed gross, but I promise I will, so for now I’m just going to provide you that publication, PNW 183, because I can’t really claim any insight here.

The last and meatiest product we made was summer sausage. In contrast with jerky, for summer sausage you want fatty fatty fattiness. It tastes pretty good, but I have to admit that I was a little bit grossed out making it. Honestly I don’t think it’s something I will really try making at home, but it was interesting to learn about. The extension service publication that you can refer to is SP 50-735. My only real original thought on the subject, since this was the one and only time I’ve experienced homemade sausage, is that I preferred the texture when we cooked it in the oven, as opposed to a pressure cooker. Both tasted very similar, but it was the texture that I found I preferred. So, that’s all I really have to say on that…check out those sausages.

IMG_3577 copy

So! If you’re a meat lover, get out there and make some meaty meaty products!

 

*this post contains affiliate links, please see the “About the Blogger” page for more information

Beef jerky – with the jerky gun!

Knowing that I got a dehydrator for my birthday, my good pal Kiki got me the jerky gun to go along with it! I finally tried it out last week and am pretty happy with the results. I just did about a pound of ground beef to try it out, which is about what the gun will hold at a time.

20130919-133326.jpg

For this first endeavour I used the spice and cure packets that came with the gun since it came with 4 packets, but in the future I’d really like to try my own recipes. I don’t like that there is really no list of ingredients on the packets. I will report back with delicious recipes in the future! This is tasty trust me, just maybe not the best for you.

20130916-225738.jpg

Here’s how I made it. Mix one pound of lean ground beef (93% lean or more) with one cure packet and one flavour packet. Add a little extra cayenne for spice if you desire (you DO desire it!)

20130916-225956.jpg

Mix it up well. It smelled so good I wanted to eat it all raw! Eww, don’t be tempted.

20130916-230045.jpg

Fill the meat into the jerky gun.

20130916-230110.jpg

Attach the end piece. I picked the one that makes 2 smaller strips.

20130916-230310.jpg

Squirt strips out onto the dehydrator tray! BAM it’s that easy!

Now, to ensure your jerky is safe from bacteria, you have two options. The first would occur here – precooking the meat. Place the meat on a baking sheet instead of directly on the trays, and cook in a preheated oven at 325F until they reach an internal temperature of 160F. Use a thin tipped thermometer to check the temperature. Then finish on the dehydrator. Option 2 is what I did, which is why the strips are going on the dehydrator raw. Option 2 is post drying heating. Once the jerky is done, immediately place them in the oven, preheated to 275F, and cook for 10 minutes. Both options work fine, you choose which you prefer.

Turn the dehydrator on the the highest setting, 160F / 71C. Preheat it for 15-30 minutes.

20130916-230349.jpg

After about an hour or so it is starting to dry but the fat is pooling on it, so pat them dry with a paper towel. Do this a few times, every hour or so. It’s also nice to flip them once, I think I did it after about 2 hours.

20130916-230426.jpg

When they are done, remove to a paper towel and leave them for a couple hours wrapped in paper towel if they still have any fat droplets. They shouldn’t really though if you had lean meat. You can tell they are done by removing a piece and letting it cool a bit. Try to bend it in half, and if it won’t break at all it’s not ready. If it splits but doesn’t snap you are probably good to go. You don’t want to cook until it snaps in half, that’s over done. For me with only one pound of beef on 4 trays it took about 5 hours to be satisfactorily done. Don’t overcook it, especially if you still need to do the 10 minutes post drying heating.

20130917-013523.jpg

Mmmm jerky. “Condition” your jerky by loosely packing it and shaking the container every couple days. This just helps redistribute moisture from moister ones to drier ones. If you see condensation forming, they are under done. Then store! I like to store it in the fridge just so it keeps longer but it will keep 2 weeks unrefrigerated. Plus it honestly probably will never last long enough to go bad! Make a big batch just before a camping trip! nom nom nom!

Love this and want a jerky gun of your own? Click here to purchase. Don’t have a dehydrator? They are totally worth the price! I have this one and so far love it!

*This post contains affiliate links. Check out the “About the Blogger” page for more information.